Description
This item is only compatible with G303 shroud, not G303! It has no microswitches on the PCB board by default. You can select microswitches with an extra $2 in the Installed Microswitch dropdown.
Hot-plug supported, you can customize the microswitches as you like on left and right button, and easily change them after the old micro switches wear out or malfunction. Some microswitches have larger pins (like Cherry DG4), you might need to sand the pins a bit.
Additional information
| Installed Microswitch | None, Cherry DG1 (1.47N), Cherry DG2 (0.74N), Cherry DG4 (0.74N), Cherry DG6 (1.50N), HUANO Blue Shell Blue Dot, HUANO Blue Shell Pink Dot, HUANO Blue Shell White Dot, Kailh GM 2.0 (Teal), Kailh GM 4.0 (Red), Kailh GM 8.0 (Black), Omron D2F-01, Omron D2F-01F, Omron D2F-01F-T, Omron D2F-F, Omron D2F-F-3-7, Omron D2FC-7-H, Omron D2FC-F-K-RZ, Omron D2FC-F-K(50M), Omron D2FC-FL-NH |
|---|
1 review for Logitech G303 Shroud Hot-swappable Micro Switch Mouse PCB board
Only logged in customers who have purchased this product may leave a review.
Sharbil (verified owner) –
I received my order in 9 days in Canada; very fast shipping! I also received a small, free screwdriver (cross) with a magnet. The hotswap PCB worked flawlessly for my G303 SE! The microswitches fit very snugly. Thank you!
By the way, you may notice that the black clips on the part where the ribbon cables connect are on the opposite side. This is an intentional design and is quite convenient. Make sure the clip is facing upwards, then insert the ribbon cable, and push the clip down.